Home » >>Mobile Barcode Scanner
 
Waterproof External Wiegand 26/34 13.56MHz RFID IC Card Proximity Reader
 

Waterproof External Wiegand 26/34 13.56MHz RFID IC Card Proximity Reader  

Product Introduction
When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer sound shows transiting data. After finishing card proximity, if the same IC card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different IC card entering Proximity Area, Reader can do response continually and send out the data.

About Use  

When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer

 sound shows transiting data. After finishing card proximity, if the same IC card is still in the proximity range, reader

will not send out the data, neither giving any sound hint. But for Different IC card entering Proximity Area, Reader

 can do response continually and send out the data     

 

Specification  

·        Wiegand 26bits/ Wiegand34bits /ABA Standard Format Data Output

·        Less than 0.2 second Response Speed

·        Less than 0.5 seconds Proximity Time Distance:

·        0-15cm Proximity Range

·        Support  UEM4100 IC Card or compatible with it( 64bits, Manchester Code) and Mifare 1

         Card (13.56 MHz Frequency),S50

·        -25 to 75 Degree Ambient Temperature,10%-90% Ambient Humidity

·        Built-in Antenna

·        Built-in LED (Double Color LED)

·        Built-in Loud Speaker (Buzzer)

·        DC9-13V Working Voltage,70mA Working Current

·        200 Meters Communication Distance

·        Real Time Data Transfer ·       Beige

·        115*75*16 (mm)    

 

Installation

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the

motherboard to the side wall with the plastic plug and screws.